{"id":6242,"date":"2026-04-10T00:34:16","date_gmt":"2026-04-10T07:34:16","guid":{"rendered":"https:\/\/www.tfngj.com\/?p=6242"},"modified":"2026-04-10T00:34:17","modified_gmt":"2026-04-10T07:34:17","slug":"four-faults-affecting-antenna-feeder-system-performance","status":"publish","type":"post","link":"https:\/\/www.tfngj.com\/es\/four-faults-affecting-antenna-feeder-system-performance\/","title":{"rendered":"Four Faults Affecting Antenna Feeder System Performance"},"content":{"rendered":"

In mobile communication, broadcasting, radar, and 5G base station systems, the antenna feeder system<\/a><\/strong> acts as the critical RF signal transmission channel. Its operational stability directly determines network coverage quality, transmission efficiency, and overall system reliability. For field engineers and maintenance technicians, a high-precision cable antenna analyzer<\/strong> is indispensable for quantifying key indicators such as VSWR, return loss, cable loss, and Distance to Fault (DTF), enabling accurate fault location and performance evaluation. This article systematically summarizes the four major fault types that impair antenna feeder system performance, with technical analysis supported by academic references and practical application of the TFN 150H cable antenna analyzer<\/a>.<\/p>\n\n\n

\n1. Impedance Mismatch Faults (The Primary Cause of VSWR Abnormalities)<\/strong><\/strong>\n<\/h2>\n\n\n\n

Impedance mismatch is the most prevalent failure in antenna feeder systems, typically caused by loose connectors, improper installation, damaged antenna elements, or inconsistent characteristic impedance of transmission lines. The core quantitative relationship is defined by the following formulas:<\/p>\n\n\n\n

VSWR = (1 + |\u0393|) \/ (1 \u2212 |\u0393|)<\/strong><\/strong><\/p>\n\n\n\n

Return Loss (RL) = \u221220lg|\u0393|<\/strong><\/strong><\/p>\n\n\n\n

Where represents the voltage reflection coefficient. Research published in IEEE Transactions on Microwave Theory and Techniques indicates that when VSWR exceeds 1.5, signal transmission efficiency decreases noticeably, and excessive reflected power may damage the RF front end module of base stations.<\/p>\n\n\n\n

The TFN 150H covers a frequency range of 2 MHz to 6 GHz with a 60 dB dynamic range. It supports VSWR measurement up to 65 and return loss measurement up to 60 dB, with high resolution reaching 0.0001 for VSWR and 0.01 dB for return loss. Equipped with built-in ECAL electronic calibration, it achieves one-touch full-band calibration, minimizing human error and ensuring reliable field test results.<\/p>\n\n\n

\n2. Cable Physical Damage and Abnormal Transmission Loss<\/strong><\/strong>\n<\/h2>\n\n\n\n

Coaxial cables used in antenna feeder systems often suffer from crushing, excessive bending, outer sheath cracking, insulation aging, or internal conductor breakage in harsh outdoor environments. These defects increase insertion loss and may lead to partial short circuit or open circuit faults. The theoretical calculation formula for cable loss is:<\/p>\n\n\n\n

Cable Loss (dB) = \u03b1 \u00d7 L<\/strong><\/strong><\/p>\n\n\n\n

where \u03b1 is the attenuation constant of the cable and L is the transmission distance.<\/p>\n\n\n\n

The TFN 150H provides cable loss measurement with 0.01 dB resolution and supports DTF fault location with up to 2065 scanning points. Based on cable velocity factor and propagation speed, it accurately calculates the distance to fault points, helping engineers quickly locate cable damage, breaks, or poor connections, greatly reducing on-site troubleshooting time.<\/p>\n\n\n

\n3. Moisture Ingress and Connector Degradation<\/strong><\/strong>\n<\/h2>\n\n\n\n

Poor waterproof treatment at cable joints, antenna ports, and feeder connectors is the main cause of moisture ingress. Moisture changes the dielectric constant of the cable, leading to increased VSWR, return loss anomalies, and significant deterioration of transmission performance. Connector oxidation, corrosion, or virtual welding further increase contact resistance, resulting in intermittent signal interruption and system instability.<\/p>\n\n\n\n

With high-sensitivity reflection measurement capability, the TFN 150H quickly identifies abnormal impedance jumps and return loss fluctuations caused by moisture. Using DTF mode, it precisely locates water ingress positions or poor contact points at connectors, supporting timely maintenance, replacement, and waterproof reinforcement to avoid long-term performance degradation of the antenna feeder system.<\/p>\n\n\n

\n4. Antenna Performance Degradation and Alignment Deviation<\/strong><\/strong>\n<\/h2>\n\n\n\n

Long-term outdoor operation causes antenna aging, radiation element damage, or deformation. In addition, wind, construction vibration, or improper installation may lead to azimuth or downtilt deviation, distorting the antenna radiation pattern and increasing system impedance mismatch. Such faults are concealed and cannot be identified by visual inspection alone.<\/p>\n\n\n\n

The TFN 150H performs full-band VSWR and return loss scanning to evaluate antenna matching status. It supports Smith chart and phase analysis for in-depth impedance characteristic assessment. Paired with optional power meters and GPS modules, it assists in coverage verification and antenna alignment correction, effectively restoring optimal radiation and transmission performance.<\/p>\n\n\n

5. Comprehensive Diagnosis of Antenna Feeder System with TFN 150H<\/strong><\/h2>\n\n\n\n

The TFN 150H integrates multiple professional measurement functions to realize full-coverage fault detection for antenna feeder systems:<\/p>\n\n\n